S-AMP 10.0QD

S-AMP 10.0QD



  • Class D with active distortion compensation
  • The most accurate sound reproduction account of less deep feedback
  • No noticeable thermal distortion when playing low frequencies
  • Full control of the speaker cone due to extremely low output impedance
  • No need to use Zobel chains, and since the feedback is taken directly from the output, distortion and non-linearities are corrected, which are included in the signal
  • Switching power supply with active power factor corrector (PFC), so the efficiency can reach 96%
  • The power supply is based on an LLC resonant half-bridge converter topology. Rectangular structures typical of capacitor circuits are converted into sine waves, greatly improving efficiency


  • Line arrays
  • Full Range Speakers
  • Subwoofers 


  • Stadiums and Sports Arenas
  • Concert Halls & Clubs
  • Bars and Restaurants
  • Malls and shops
  • Amusement parks
  • Theme parks
  • City parks and squares
  • Educational institutions
  • Open air events
Input mixer
4 channels: 4 analog channels, 4 AES/EBU channels, routing
Output processing
Linear-phase and classical crossover, 10-band parametric equalizer, delay, limiter, gain, polarity switching
Conversion resolution
Internal sample rate
192/96 kHz / 32 bit
Max delay
2 sec
Inputs and Outputs
4 analog inputs, 2 AES/EBU(AES3) inputs
Input Dynamic Range
114 dB
Supported resolutions
Up to 24-bit
Supported sample rates
18- 192 kHz
Remote control and monitoring of the network connection
Dual-port Ethernet Gigabit interface
Custom Software
Number of channels
Class D with active distortion compensation
Peak output voltage
141 V
Max output current
53 A
Output power
2,66 Ohm
4 Ohm
8 Ohm
16 Ohm

Output power according to CEA-2006 / 490A (1% THD, 1 kHz)
3260 W
2600 W
1300 W
650 W
Sound performance
THD + N at 1 kHz and 1 dB below overload
Signal to noise ratio
>112 dBA
Frequency response (1W, 8 ohms)
20 Гц - 20 kHz (± 0,5 dB)
Input and output connectors
Mains power
Input connectors
3-pin XLR, electronically balanced
Output connectors
SpeakON NL 4 - 4 pcs.
Power Supply Schematic
Half-bridge inverter (LLC) with active power factor correction (PFC)
Power supply, 220V / 16A
160-250V (50-60 Hz)
Weight and dimensions
Dimensions (WxHxD)
482x88x524 mm
16 kg